At International Coatings our philosophy is simple.  Floors should be resin rich formulations
without the need of “sealer” coats for final protection.  Floors should not be hard and brittle
but must be flexibilized with physical properties closer to that of concrete. 

This is why our flooring systems offer the inherent advantages of epoxies – superior bond
strength in damp and dry conditions  – no odor – contain no solvents or toxic byproducts –
excellent chemical resistance – thermal  shock and impact resistance – can be applied in a
single step in any thickness, saving days of costly downtime – offers unsurpassed longevity.

(click for larger image)

PLATING / METAL FINISHING
ICO Hi Guard – From the floor up, a bright new look was wanted for this state-of-the-art
plating facility, relocated after a fire.  After concrete surface prep, including repairing
cracks and holes, a coat of ICO Primer LV FC (low viscosity, fast cure) was applied.  That
was followed by ICO Primer SL (slurry) at 1/8” thick, followed by two 15 mil top coats of
Royal Blue ICO Hi-Guard Coating.

(click for larger image)

BRIDGE DECK
(cracks from vibration and freeze and thaw conditions)
ICO Flexi-Coat – A base coat of ICO Flexi-Coat FC (fast cure) was put down
followed with a broadcast of Black Beauty Aggregate, until refusal, followed
by a coat of ICO Flexi-Coat MC (medium cure) and another broadcast of Black
Beauty Aggregate.  The bridge opened to traffic less than 11 hours after the Job was started.

(click for larger image)

NEW BREWERY
ICO Quartz – A base coat of ICO Guard Resin was applied first, followed with
a double broadcast of color quartz and a top coat of ICO Epoxy Sealer. ICO
Quartz Cove was used to transition from the floor to the walls, which were
finished with ICO Glaze, for a high gloss finish.

(click for larger image)

BEVERAGE BOTTLER
ICO Guard 51 – This ¼” trowelled, single step, virtually odorless, food grade,
epoxy  floor was installed around and under this plants equipment.  This
product is formulated to withstand extreme thermal shock, including steam cleaning.

(click for larger image)

PUBLIC WORKS GARAGE
ICO Floor 51 – The floor was primed first with 100% solids Epoxy ICO Primer LV,
followed by ¼” thick ICO Floor 51 in a power trowelled application, and then
broadcast with sand.  Yellow safety striping was added using a single coat of ICO
Floor Coating SY (safety yellow).

(click for larger image)

FOOD PROCESSING PLANT
ICO Guard 51 – This 100% solids epoxy was trowelled up 4inches thick In a single
application.  ICO Guard Coating was used on curbs, and  ICO Lastic  Gun Grade was
used for caulking between the new floor and the s.s. wall panels.  ICO Gel was used
to fill bug holes, and ICO Glaze Top Coat was used to renew the ceiling.

(click for larger image)

HANGER
ICO Floor Coating – After concrete surface prep, ICO Primer LV (low viscosity), a highly penetrating
material was applied, followed by ICO Floor Coating.  ICO Floor Coating has good chemical resistance,
especially to Skydrol.  A top coat of ICO Ure Guard 60 was used to provide UV protection, abrasion
resistance and a high gloss east-to-clean finish.

(click for larger image)

FIREHOUSE
ICO Floor SL – After surface prep, a thin coat of ICO Primer LV FC (low viscosity fast cure)
was used, followed by the application of the 1/8” thick ICO Floor SL.